GABION MESH PACKING MACHINE
PRODUCT INTRODUCTION
Gabion mesh Packing Machinery is dedicated for gabion mesh's packing, press the gabion to smaller CBM. The machine has an independent power sector and electrical systems, using the button to centralized control. The machine consists of rack, pressure plate, oil cylinder, oil pump unit, tank, electrical box and so on. It can produce as your requirement.
Gabion mesh Packing Machine
Operating principle
When the machine work, oil pump unit provide the pressure oil via safety valve limit the pressure and enter manual reversing valve, when manual reversing valve work on the left, pressure oil enter on the oil cylinder via piston, piston rod pull pressure plate run downwards, the down oil of the oil cylinder stream back to tank via reversing valve. When Manual reversing valve work in the middle, the up and down oil of oil cylinder will be closed by reversing valve, pressure plate can keep pressure and stay on anywhere, oil cylinder discharge loads via reversing valve, when reversing valve work on the right, pressure oil enter down part of oil cylinder pull pressure plate run upwards, the up part oil of the oil cylinder flow back to tank via reversing valve.
Above of the oil cylinder arranges the middle device, can decrease the pressure and run to the up limit.
Main Specification
Nominal pressure: 80KN
Working stroke: 700mm
Plate downlink speed: 35mm / s
Plate uplink speed: 50mm / s
Machine Package size (L X W X H): 3700x2450x1250mm
Product packaging dimensions (length X width X height): 2000x1000x1000mm
Hydraulic system working pressure: 5MPa
Hydraulic oil: 32 # hydraulic oil 120KG
Installed power: 7.5KW
Product Tags:
|
|
Packing 1.6mm Gabion Mesh Machine , Hexagonal Wire Mesh Machine Images
|
